www.cuesinc.com | salesinfo@cuesinc.com
CUES Product Catalog
CUES Product Catalog
50
51
CUES
110 or 220 VAC.
Requires (8) Conductors: (6) for the cutter and (2) for
the reel mounted remote air valve.
Recommended minimum air requirements: 38 CFM
(1,076 Lpm) @ 125 psi (9 bar).
Controls, Electrical: 360-degree rotate, up/down,
in/out, on/off, and polarity.
Controls, Pneumatic: cutter motor, cutter locking brake.
Includes (3) 24v DC electrical drive motors assembled
into a waterproof housing.
Includes (2) router bits and pipe lock assembly.
SMALL KANGAROO CUTTER ONLY
-
For use in 6"- 12"
(152 mm - 305 mm) Diameter Relined Pipe.
Includes low profile metal skids for 6" (152 mm) pipe
mounted to the cutter housing and extenders for 8"
(203 mm) and up.
Includes a .9hp air motor to provide more power,
increased productivity, and a smoother cut when
operating in 8"- 12" (203 mm - 305 mm) relined pipe
.
GIANT KANGAROO CUTTER ONLY
-
For use in 12"- 30"
(305 mm - 762 mm) Diameter Relined Pipe.
Removes protruding lateral services.
DUAL KANGAROO CUTTER CONTROLLER
Operates
both Large and Small Kangaroo Cutter.
Includes all switches, potentiometers, controls, and
meters required to operate and monitor the Giant
Kangaroo and Small Kangaroo Cutter.
Controls the cutter head movements in (6) directions:
IN / OUT, RIGHT / LEFT ROTATION, and UP / DOWN.
A rotary potentiometer is provided to adjust the speed
of each control motor.
An Amp meter is provided to display the current draw
by each motor.
The Air Motor/Clamp - ON/OFF switch opens and
closes the air flow of the remote air solenoid while
simultaneously activating or deactivating the pipe lock
system and cutter air motor.
Custom CCTV/Cutter Truck and Trailer-mounted units
include full capabilities for reinstating lateral services,
removal of protruding taps, brush finishing existing cuts,
and pre and post TV inspection.
·
High Cubes, Step Vans, and Medium Duty Chassis
and Trailer Mounted Units.
·
Dry freight box mounted for export.
·
Can be mounted with joint and lateral sealing
equipment in a self-contained unit.
·
Compressor can be onboard or towed behind.
OPTIONAL EQUIPMENT
·
Desktop control unit for both cutters.
·
Protruding lateral cutter attachments.
·
12" (305 mm) extenders for Small Kangaroo Cutter.
·
Air Hose Reel with speed control / retrieve with 500'
(152 m) 1/2" (13 mm) or 3/4" (19 mm) ID air hose.
·
Automatic level wind for Air Hose Reel.
Both small and giant Kangaroo Cutters: