14
i
i
Supplied in rolls
Thickness in mm
Packaging in sqm
7
30
Adhesive on the whole joint height of 150 mm.
Adhesive side coloured in blue.
Supplied in 60 m rolls.
Ï
"KILMA-FON" panel.
Flexible sound-proof insulation
underfloors consisting of several
coupled layers in different densities,
in closed cells polyethylene.
Resistant to yard abrasions.
Totally free from CFC and HCFC.
Supplied in rolls.
Thickness: 7 mm ± 0.4
Average density: 60 kg/m
3
Operating temperature: -10°C÷+75°C
Fire resistance class 1, supplied in rolls
Sound-proof insulation resistant to extended
walking: from 54 dB to 58 dB, depending on
the thickness of the foundation.
4381296
25x1,2
7
1
Code
Panel dimensions cm
LxH (m)
Insulating
thickness mm
UNITS/
pack.
EURO/m
2
3068881
60
150x8
1
Code
Roll dim. in m
Dim. mm
UNITS/
pack.
EURO/m
Fixing clip.
Clip to fix pipes
to the KILMA panel.
In plastic with locking fin.
Fixing clips for
Kilma strong panel.
Fixing clips of the Kilma strong
to the Kilma PS.
In PE with locking fin.
Available in 2 versions according
to the thickness of the Kilma ps
panel.
2353152
E2 Short Staple 40mm
200
1887563
E2 Long Staple 60mm
100
Code
Description
UNITS/
pack.
EURO/pc
Base perimeter joint.
Combined with an LDPE sheet to
hold mortar in screed.
2141286
10
1000
4424834
20/30
1000
Code
Kilma PS panel thickness [mm]
UNITS/
pack.
EURO/pc
"KILMA-PLAST".
Insulated panel in expanded
polystyrene in closed cells,
with pre-formed relief to fix
the pipe, coupled with "PS" film.
Name and classification:
compliant with Directive
89/106 EEC CS (10) 150
Euroclass E.
Undercut relief with 50 m intervals
for circuits with a pitch of:
50, 100, 150, 200, 250, 300 mm. Density
30 kg/m
3
.
Panel supply
Thickness in mm
Packaging in sqm
15
13,5
25
10,8
35
9
Possible diagonally pipe locking
Ï
1104292
1200x750x40
15
15
4298358
1200x750x50
25
12
1288703
1200x750x60
35
10
Code
Panel
dimensions mm
Insulating
thickness mm
UNITS/
pack.
EURO/m
2
D
OMESTIC
F
LOOR
I
NSTALLATION
1 Mtr Aluminium Heat Panel
Double.
· Double heat panels - Used to
spread the heat evenly across an
entire floor area
· Aluminium panels for laying on
wooden suspended, sprung
timber, battened or floating floors
· When the floor to be heated is cov-
ered by the panel's pipe can then be
installed in the pre-
designed centres of 200mm apart.
· They are fixed to the underside of the floor
using staples or screws
· When the plates and pipework have been
installed, insulation is placed in the void below
the plates to minimise downward heat loss
· Panels can be cut to fit where necessary
2561705
1 Mtr
1
Code
Description
UNITS/
pack.
EURO