68
HYDRAULIC CHARACTERISTICS
DIMENSIONS
·
Height of unit: 455mm.
·
Width of unit: 235mm.
·
Connections: 3/4"H.
·
Distance between branches: 95mm
INSTALLATION AND START-UP
A vent chamber is installed so that the air can be purged from an
accessible area. The fluid "with air" flows through the inner pipe and on
expansion the bubbles separate and accumulate in the upper part of the
chamber. The chamber has a manual vent so that the air accumulated is
periodically evacuated.
Pipe connection
The joints with the hydraulic unit must be made using the
corresponding connectors before fixing the pipe in place, to
prevent damage to the EPP casing.
Wall-mounting the Hydraulic Unit
1. Make holes in the wall for the rawl plugs at the distances indicated.
2. Place the fixing plate in the position indicated, and screw the screws
into the holes.
Note: make sure the visible elements coincide with the holes in the hydraulic
unit cover
SOLAR THERMAL CONTROLS
Solar Brochure EXTRA:Layout 1 19/02/2010 12:56 Page 68