regulators and as flow deflector valves in solar heating system
primary circuits.
voltage is supplied to the motor the valve opens and the micro
with inlet at AB and outlets at A and B, and with path A normally
closed (no voltage). When voltage is supplied to the motor, path
A opens, path B closes and the micro switch closes (if there is
one).
connection of the valve part to be made without the motorised
part needing to be assembled.
part can be replaced without needing to drain or work on the
installation.
ˇ Maximum fluid temperature: 160ēC.
ˇ Fluid: 50% water-glycol mixture.
ˇ Maximum ambient temperature: 50ēC.
ˇ Maximum static pressure: 10 bar.
ˇ Maximum differential pressure:
ˇ Closing time: 5 s.
ˇ Supply voltage: 230V (24V also available).
ˇ Consumption: 6 W.
ˇ Cable length: 60 cm (other lengths available to order).
ˇ Complies with European Directives 89/336/EEC and 73/23/EEC.