batches can be started or stopped, variable data can be
send to the printer and vision system, messages and alarms
can be read and the overall machine status can be monito-
red. The main HMI on the operator side of the machine is
duplicated so that an additional HMI can be viewed from
the service position on the machine.
consuming manually mechanical adjustments are necessary.
After selecting a predefined format on the HMI, the repla-
cement of a few format parts is all that is required.
on motor driven spindles and will automatically be adjusted
when a format is loaded.
service or maintenance is made easy through the several
large doors in the machine cover on all sides of the machi-
ne. Furthermore all machine components to where access
is required, are placed easy accessible within short reaching
distance.
an absolute minimum of hidden slots, openings and visible
wires and air hoses.
be monitored. The shift register is related to the control
functions that are integrated, and will in general consist of
the following:
before it is applied to the vial. Inspection of printed in-
formation, label ID etc. Non-approved labels are rejected
before application at the label reject station. Functionality
of reject station is monitored by counter control sensors.
Inspection of label presence/position, presence of cap etc.
Only approved vials are allowed to leave the index wheel.
Non-approved vials are rejected at the vial reject station.
Functionality of reject station is monitored by counter
control sensors.