doors and windows are warranted against defects in materials and manufacture from the date of purchase as specified in the chart on the following page, under normal conditions of use and maintenance. Sunshine and regular atmospheric pollutants may cause a gradual change in colour, chalking or an accumulation of spots or surface dirt on all PVC and/or aluminium products. These are natural occurrences, which are excluded from the warranty. doors and windows for the life of the product. This warranty applies to insulated glass units manufactured from clear or low emissivity glass (type low-E) when used for the manufacture of complete products only and covers the formation of condensation or dust deposits between the two glass panes caused by a break in the sealed joint, which results in noticeable reduction in visibility, according to the chart on the following page. Fenplast's exclusive door windows are deposits between the two glass panes caused by a break in the sealed joint. All other decorative glass or insulated glass with blinds between the glass panes, coming directly from glass suppliers other than Fenplast (Novatech, Verre-Sélect, Vitre-Art, Masonite, etc.) will be warranted based on the specifics of each of the manufacturers of these types of glass. Spontaneous breakage of glass will be covered for a period of no point of impact on the glass. For the tempered glass used in sliding doors, of the interior glass. defects in manufacturing or materials and will replace any part found to be defective under the following conditions: |