G
GP
P--1
1 G
Ga
atte
e S
Sw
wiittc
ch
h
Order Toll-Free: 1 800 252 1910 · www.cjanderson.com · Fax: 1 708 867 5467
217
GP-1 Gate Switch
This cast aluminum switch with sturdy, self
wiping copper to carbon contacts is designed to
work at up to 250 volts AC or DC. This is a
normally open contact switch which makes or
closes when the button is depressed. The closed
contact permits operation of the driving machine,
and stops operation of the driving machine when
pressure is removed from the button, opening the
contact. The contacts and button are both spring
loaded to open automatically when the pressure
is removed. The button comes with a 1/4"-20 tap
for insertion of a rod, if needed, to permit
operation of the switch from a distance, such as
through a wall where the switch and button are
in the hatch and the activating rod end in the hall
way.
Some common uses for this switch are:
· Jogging or Trucking Up
· Sliding Gate Switch
· Swing Door Switch
· Emergency Exit Switch
The switch is designed to be mounted either
vertically or horizontally.
MODELS AVAILABLE
HEAVY DUTY - STANDARD
79250
GP-1 Gate Switch
HAZARDOUS LOCATION
79250-HS
GP-1 Gate Switch
(Class 1, Division 2)
ACCESSORIES
79250-TR-12
1/4" 20 Threaded Rod
Extension - 12" Long
Ordering Information