AM Docks Steel Truss Frames are constructed from 1-1/2" x 1-1/2" x
3/16" steel angle separated by 1/2" diagonal round bar to create a rigid
box frame. To provide additional strength, we add corner gussets and
horizontal and vertical supports. We pre-punch holes in the sides and
ends to allow for ease of bolting. Our standard frames are 10' in length
and 12" high. The standard widths available range from 2 to 8 feet wide.
Once frames have been punched and welded, the entire frame is hot-
dipped galvanized for long-lasting service.
Our welded Truss Finger Deck Stabilizers really add stability to
finger docks while providing a safe access onto the dock.
STF-FS30
Finger Stabilizer 30"
21 lbs.
The finger stabilizer is an inexpensive way to add stability to
your dock. It extends 30" down the dock.
STF-FDS3
STF-FDS4
Deck Stabilizer 3'
Deck Stabilizer 4'
48 lbs.
65 lbs.
Call for pricing on 2" Frames and special sizes.
STF-210T
STF-310T
STF-410T
STF-510T
STF-610T
STF-710T
STF-810T
2' W x 10' L x 12" H Truss Frame
3' W x 10' L x 12" H Truss Frame
4' W x 10' L x 12" H Truss Frame
5' W x 10' L x 12" H Truss Frame
6' W x 10' L x 12" H Truss Frame
7' W x 10' L x 12" H Truss Frame
8' W x 10' L x 12" H Truss Frame
138 lbs.
171 lbs.
210 lbs.
245 lbs.
270 lbs.
312 lbs.
365 lbs.
American Muscle Docks Full Tapered Truss Frames are perfect
for ramps. The frames are tapered from 12" to 5" and can
accommodate optional rollers found on page 36.
STF-310FT
STF-410FT
STF-610FT
3' W x 10' L Full Taper Truss Frame
4' W x 10' L Full Taper Truss Frame
6' W x 10' L Full Taper Truss Frame
168 lbs.
205 lbs.
251 lbs.
3' x 10' TRUSS FRAME SHOWN
TRUSS FRAMES
TAPER TRUSS FRAMES
OPTIONAL UHMW ROLLER ASSEMBLY AVAILABLE
1/4"
STEEL TRUSS DOCK HARDWARE
34
800-223-3444
* Bolts to the finger and main dock.
Allows for decking and adds space.