SOURC ES MARKER SOURCES* .25" (6.35 mm) PEN POINT T MARKER SOURCE FILLABLE POINT Label 9.26" (23.5 cm) Handle 10.1" (25.7 cm) Active Bead he Pen Point Marker Source contains Co-57 in a ceramic matrix at the end of a 9.26" (23.5 cm) anodized aluminum rod. The pen-shaped rod screws into a brass cap which shields the active point. The Pen Point Marker Source is used in tracing the outlines of anatomical features on a patient. The trace appears almost instantly on the camera display. Contained activity is supplied as a nominal value ±15%. SPECIFICATIONS: M Save time for camera-to-patient alignment SPECIFICATIONS: arker Sources are easily filled with the same radionuclide to be used in imaging procedures. Small clear plastic receptacle, 1'' diameter x .5'' thick, has a centered channel to contain 0.2 cc of the nuclide. A nylon screw-plug tightens against an O-ring completing a tight, safe seal. Marker is re-usable or nuclide can be decayed or removed. ➝ ➝ 1.25" (31.75 mm) Marker Source, Pen Point, 100 µCi Marker Source, Pen Point, 200 µCi Not available for export. 063-700 063-701 SPOT MARKER SOURCE* 099-289 099-291 Marker Source, Spot, Co-57, 50 µCi Marker Source, Spot, Co-57, 100 µCi *A photocopy of your NRC or Agreement State License must accompany orders for radioactive sources and must clearly indicate your authority to possess the source being ordered. Not available for export. Place an Order or Receive a Quote sales@biodex.com • +1-631-924-9000 • 1-800-224-6339 ➝ ➝ ➝ Brass Cap Dimensions: 9.26" l x .25" dia (235 x 6.35 mm) Nuclide: Co-57 Source: 2 mm bead Nominal Activity: 063-700 100 µCi 063-701 200 µCi Source Cover: Brass cap Dimensions: 1" dia x .5" thick Volume: 0.2 cc 043-274 ➝ ➝ ➝ Marker Source, Fillable Point, 4/set CHECK SOURCE* I nstrument functionality is easily assessed with a Cs-137 Check Source. The activity is 10 µCi. A license is necessary. A Spot Marker Source is easily taped to the patient for purposes of orientation while performing a camera study. SPECIFICATIONS: Check Source, Cs-137, 10 µCi (uncalibrated), 1" dia x .25" thick (2.5 x .64 cm) Not available for export. 101-103 LIVER MARKER/RULER he Liver Marker/Ruler is designed to mark, outline, and measure the liver while performing routine studies. When placed over the area of interest, a measurement is taken by counting the space between holes. The marker is made of vinyl-coated leaded rubber for flexibility and easy cleaning. Each unit is 5.5" long and 2" wide with holes 1 cm apart. Two units are supplied as a kit. Note: Product contains lead. Handle with gloves and avoid skin contact. SPECIFICATIONS: Co-57 Spot Marker Sources Dimensions: 1" dia x .25" thick (25 x 6 mm) clear lucite disk Spot: .125" dia (3 mm) Activity: 099-289: 50 µCi 099-291: 100 µCi T Dimensions: 5.5" l x 2" w (14 x 5 cm) Holes: 9 mm dia Lead Equivalency: 1 mm 123-500 Liver Marker/Ruler 81