P H A N TOMS JASZCZAK FLANGELESS DELUXE SPECT PHANTOM ECT phantom for SPECT, meets ACR requirements ESSER FLANGELESS DELUXE PET PHANTOM ECT phantom for PET, meets ACR requirement PET For Deluxe Flangeless SPECT Phantom Esser Flangeless PET Phantom™ Standard PET/SPECT Phantom 043-762 Deluxe PET/SPECT Phantom 043-750 he flangeless PET and SPECT phantoms provide consistent performance information for any PET or high-resolution SPECT system. Multiple perforCold Rods Cold Spheres mance characteristics of camera-based SPECT systems are evaluated from a single scan of the phantom. On- and off-axis transverse line spread function may be easily measured without removing the cover plate. Measurements of full-width-half (or tenth) maximum can be readily determined, either in air or in water. The flangeless phantoms for PET and SPECT meet the requirements set by the ACR. Rod Dimensions Sphere Inserts for PET and Spect Phantoms Dimensions Standard 16mm. T Uniform and Line Source 12.7 38 mm. 11.1 RODS 6.4 31.8 SPHERES 12.7 7.9 9.5 25.4 15.9 19.1 10.8 cm. Flangeless PET Phantom Lid™ SPECIFICATIONS: Image of PET Phantom Lid PET Phantom Lid Containers UNIFORM DeLuxe 12.7 4.8 mm. 9.5 mm. 11.1 RODS 6.4 31.8 SPHERES 12.7 7.9 9.5 25.4 15.9 19.1 *LINE SPECT and PET Phantoms: Cylinder Interior Dimensions: 8" dia x 7.32" h (20.4 x 18.6 cm) Volume: 6.4 L Cold Rod Insert Height: 3.46" h (8.8 cm) Cold Rod Diameters: 4.8, 6.4, 7.9, 9.5, 11.1 and 12.7 mm Height of Spheres From Base Plate: 5" h (12.7 cm) Solid Sphere Diameters: 9.5, 12.7, 15.9, 19.1, 25.4 and 31.8 mm SOURCES 8.6 cm. 9.5 mm. Flangeless Esser PET Phantom Lid™ Benchmark PET/SPECT Phantom 043-770 25.4 11.1 38 mm. 31.8 RODS 19.0 12.7 Elliptical PET/SPECT Phantom 043-722 – System performance evaluation of: Collimator, Artifacts, *With Calibration, and Reconstruction Parameters user supplied capillary tubes. – Acceptance testing – Routine quality, assurance and control – Evaluation of: - Center-of-rotation error - Non-uniformity artifact - Changes of radius-of-rotation on spatial resolution - Reconstruction filters on spatial resolution - Attenuation and scatter compensation – Single slice volume sensitivity – Total system volume sensitivity – Lesion detectability 15.9 25.4 15.9 19.1 6.4 SPHERES 12.7 Refillable thin-walled cylinders: 8,12,16,25 (x3) mm Solid cylinder (Teflon®): 25mm Cylinder height: 1.5 in Lid Closure: Bayonet-Style with Lock Screw 043-765 043-772 043-757 11 cm. 16 mm. 7.9 25.4 31.8 RODS 12.7 9.5 19.1 SPHERES UNIFORM 15.2 cm 38 mm. Phantom, SPECT, Flangeless, Deluxe Phantom, PET, Flangeless, Esser Phantom, PET/SPECT, Flangeless Includes PET and SPECT phantom lids 11.1 15.9 12.7 Related: Phantom, Hollow Spheres Set (6) Phantom Insert, Triple Line 043-777 Phantom Insert, Cardiac Phantom inserts are featured on page 88. 043-763 043-730 Note: Inserts are easily removed to install additional fixtures. *LINE SOURCES 12.7 cm *With user supplied capillary tubes. Place an Order or Receive a Quote sales@biodex.com • +1-631-924-9000 • 1-800-224-6339 85